TDK assembly in a 4m deep excavation pit
Category: References
Salvage dump truck
Recovery of a dump truck -- A 100 tonne dump truck had to be recovered and turned. This was done in a tandem lift with two 300 tonne cranes.
Assembly of high-bay warehouse
Assembly of high-bay warehouse -- On this construction site, we used a Liebherr LTM 1095 5.1 with a 60m mast to erect a high-bay warehouse from individual modules. The modules were pre-assembled horizontally on the ground and then brought into the vertical position and lifted to their destination. The dimensions of the entire warehouse were 45 metres wide, 110 metres...
Very narrow machine hall
Very narrow machine hall -- A printing unit had to be lifted onto a machining centre. Ceiling height only 7.8m and clearance width 2.7m.
TDK dismantling downtown
TDK dismantling city centre -- A 72m high TDK was dismantled in a city centre
Dredger dismantling
Dredger dismantling - - A dredger was completely dismantled for onward transport
25 metre high silo turned and erected
25m high silo turned and erected - - An 80 tonne crane and a Palfinger loading crane were used to lift a 25m high aluminium silo from the trailer and turn it in the air. It was then placed on a concrete foundation.
English (UK) 
Deutsch